BETAFPV Meteor75 1S Brushless Whoop Drone TBS Crossfire with BT2.0 Connector F4 AIO 1S FC VTX 18000KV 1102 Motor C02…

SPECIFICATION
FC&ESC: F4 1-2S AIO Brushless FC
Frame: Beta75 Pro 2 Whoop Frame
Motors: 1102 18000KV motor
Props: 40mm 3-Blade Propellers (1.5mm Shaft)
Canopy: Injection molding canopy
VTX&Camera: M01 AIO Camera VTX
Receiver Option: TBS Crossfire
Battery: BT2.0 450mAh 1S 30C Battery
Flight time: 3-4min
Weight: 28.7g (without battery)

SPECIFICATIONS OF FC & ESC
CPU: STM32F411
Six-Axis: MPU6000
Size: 26mm x 26mm, Whoop mounting pattern
Firmware version: betaflight_matekf411rx_4.0.0 (Development Version)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
Built-in 1-2S ESC with 5A continuous and peak 6A current
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX

Recommend Parts
F4 2S AIO FC No Rx — www.amazon.com/dp/B07MT3VM3Z
1102 18000KV Motor — www.amazon.com/dp/B0834P2LSY
BT2.0 450mAh 1S Battery — www.amazon.com/dp/B082MHWDPF
BT2.0 Connectors (10pcs) — www.amazon.com/dp/B081CFXCH8
BT2.0 1S Whoop Cable Pigtail — www.amazon.com/dp/B081CGRH4B
BT2.0-PH2.0 Adapter Cable — www.amazon.com/dp/B081C5RLJ9
BT2.0 Battery Charger and Voltage Tester — www.amazon.com/dp/B081C9X3T5

Package
1 * Meteor75 Brushless Whoop Quadcopter (1S)
1 * 450mAh 1S 30C Battery with BT2.0 connector
1 * BT2.0-PH2.0 Adapter cable

Make sure this fits by entering your model number.
【BT2.0 Connctor】With The BT2.0 connector, Meteor75 effectively decreases internal connector resistance for a much better discharge performance compare with initial PH2.0 connector
【BT2.0 450mAh 1S Battery】Meteor75 is the first generation whoop powered by brand-new BT2.0 450mAh 1S battery，you can get 3:00-4:00 flight time
【1102 18000KV Motors】Equipped the latest 1102 18000KV motors and 40mm 3-blade props, which provides pilots stronger experience of a powerful outdoor flight like a 2S whoop drone
【F4 1- 2S AIO FC】With the high performance STM32F411 processor 1-2S AIO FC boards and betaflight_matekf411rx_4.0.0 (Development Version), pre-soldered the BT2.0 cable, which can provide more stable and powerful 9A continuous current
【New TBS receiver antenna】Equipped BETAFPV new TBS receiver antenna. T-shaped design shortens the length which makes the flight more convenience than too long antenna. Any problem please contact us via Email support04@betafpv.com